Ninja Juicer Models Compared: Price, Specs, and Which to Buy

If you searched "ninja juicer," you are probably looking at SharkNinja's NeverClog Cold Press Juicer and wondering whether it holds up against dedicated slow-juicer brands like Hurom, Kuvings and Omega, or against a cheaper centrifugal machine from Breville. The current top results for this search are Ninja's own store pages, a Costco listing and a couple of video reviews - none of them puts the Ninja juicer next to its competitors on price and specs in one place.

This guide does that comparison. Every price, spec and warranty term below comes from the manufacturer's own product page, a major retailer listing, or an established review site - checked on September 8, 2026 - so you can see where the Ninja juicer actually sits before you spend $130 to $450 on a juicer.

Quick answer:

Budget pick: Ninja NeverClog Cold Press Juicer JC151 - $129.98, 150W, cheapest cold-press-style option in this comparison.
Best overall: Hurom H-AA Slow Juicer - $399, Hurom's best-selling model, built around its dual-auger cold-press system.
Best for versatility (nut butter, baby food): Omega VRT350 - $349.99 (discontinued by Omega), vertical masticating auger that doubles as a food processor for nut butter and baby food.

Ninja juicer vs. cold-press competitors: price and specs compared

Model	Type	Price (checked Sep 8, 2026)	Motor	Warranty	Best for
Ninja NeverClog Cold Press Juicer (JC151)	Cold press, single auger	$129.98	150W high-torque	1 year	Lowest price, first cold-press juicer
Breville Juice Fountain Cold (BJE430)	Centrifugal, not cold press	$199.95	850W	Check listing	Speed and volume (70oz jug)
Omega VRT350	Cold press, vertical masticating auger	$349.99*	150W	Check listing	Versatility - also makes nut butter and baby food
Hurom H-AA Slow Juicer	Cold press, dual auger	$399	Check listing	10 years (motor)	Hurom's best-seller, balanced starter cold press
Hurom H310 Easy Clean	Cold press, dual auger	$449	Check listing	Check listing	Two-part strainer, faster cleanup
Kuvings C7000 Whole Slow Juicer	Cold press, single auger	$449.99	240W, 60 RPM	10 years	Longest warranty, 3-inch whole-fruit feed chute

*Omega VRT350 is listed as discontinued by Omega; price ($349.99, marked down from a $429.99 retail price) sourced from an authorized juicer retailer's listing, which recommends the Omega VSJ843 as the current replacement model - confirm availability before buying.

Is the Ninja juicer worth it compared to other brands

On price alone, the Ninja NeverClog juicer is the cheapest cold-press option in this table by $70 or more. It uses a 150W high-torque auger, the same general motor class as the Omega VRT350, and it comes with two interchangeable pulp filters so you can adjust how much pulp ends up in the juice. For someone who has never owned a slow juicer and wants to try one without spending $400, that price point is the real appeal.

Where it gives ground to Hurom and Kuvings is warranty length and brand track record. Ninja backs the JC151 with a 1-year limited warranty, while Kuvings covers the C7000 for 10 years on parts and labor and Hurom covers the H-AA's motor for 10 years as well. Hurom and Kuvings have built their entire product lines around slow juicing for over a decade; Ninja added a juicer to a catalog built mostly around blenders and air fryers. That does not make the Ninja juicer bad, but it means the long-term reliability data other brands have from years of dedicated juicer production is not something Ninja has published yet.

Cold press vs. centrifugal: what "ninja cold press juicer" actually means

Every juicer in this comparison except the Breville Juice Fountain Cold uses cold-press (masticating) extraction: a slow-turning auger crushes and presses fruit or vegetables instead of shredding them with a fast spinning blade. Cold press machines run at low RPM, generate less heat and oxidation, and typically yield juice that stays fresher longer in the fridge.

The Breville uses a completely different method - centrifugal extraction at high speed - even though Breville markets its "Cold Spin Technology" as keeping the juice cold during extraction. It is not a masticating machine and its juice does not keep as long. If the term "ninja cold press juicer" is what brought you here, know that the Ninja NeverClog is a true auger-based cold press machine, not a centrifugal one - that part of its marketing is accurate.

Capacity and size: which juicer fits your kitchen and routine

• Ninja NeverClog JC151: 24oz juice jug, 36oz pulp container, 12.11 x 7.15 x 15.93 inches, 7.94 lbs - one of the more compact machines here.
• Breville BJE430: 70oz juice jug - the largest single-batch capacity in this comparison, useful if you juice for a family in one run.
• Kuvings C7000: 3-inch wide feed chute, wide enough to drop in whole apples or small carrots without pre-cutting, which cuts prep time versus narrower chutes.

If counter space is tight, the Ninja and Omega are the smaller footprints of the group. If you juice large batches at once or hate pre-cutting produce, the Breville's jug size and the Kuvings' feed-chute width matter more than price.

Cleanup and daily use

Ninja lists the JC151's juice-contact parts as dishwasher safe, which removes one of the biggest complaints people have about slow juicers - hand-washing a mesh strainer every day. Hurom's H310 Easy Clean model is built specifically around a two-part strainer basket designed to rinse clean under a tap in about two minutes, aimed at the same daily-cleanup problem from a different angle. Kuvings uses Tritan and ULTEM parts, marketed as BPA-free and durable, but Kuvings does not list its C7000 juicing screen as dishwasher safe on its product page, so check the current listing before assuming it is.

Common mistakes when buying a juicer like this

• Comparing a centrifugal machine to a cold-press machine on juice quality. The Breville is faster and cheaper to run per batch, but its juice oxidizes faster than any auger-based machine in this table - that is a tradeoff, not a defect.
• Ignoring warranty length. A 1-year warranty (Ninja) versus a 10-year warranty (Kuvings) is a real difference in what happens if the motor fails in year two - factor it into the price comparison, not just the sticker price.
• Assuming "NeverClog" means zero maintenance. Ninja's two interchangeable pulp filters are designed to reduce clogging with fibrous produce like celery and leafy greens, but the machine still needs regular cleaning like any auger juicer.
• Buying the biggest jug you can find without checking your counter space. The Breville's 70oz jug needs more clearance than the Ninja's 24oz jug or Omega's compact vertical body.

Where to buy a Ninja juicer for less

SharkNinja lists the JC151 at $129.98 (reduced from $149.99) directly on its own site. The same model also shows up at Amazon, Target, Walmart and Costco under slightly different bundle names, so it is worth comparing the exact model number (JC151 or JC150, which has a smaller 18oz jug) across retailers before buying, since promotional pricing shifts between them. Competing brands like Hurom and Kuvings sell primarily through their own sites and Amazon, with less frequent markdowns than Ninja's rotating retail promotions.

FAQ

Is the Ninja NeverClog juicer actually a cold press juicer?

Yes. It uses a 150W auger that crushes and presses produce at low speed, the same basic method Hurom, Kuvings and Omega use, rather than the high-speed blade a centrifugal juicer like the Breville uses.

What is the difference between "juicer ninja" model JC150 and JC151?

The JC151 has a larger 24oz juice jug and 36oz pulp container. The JC150 is the smaller version with an 18oz jug and 30oz pulp container. Both use the same 150W motor and two-program controls.

Can I use a Ninja blender as a juicer instead of buying the NeverClog?

No. A standard Ninja blender purees the whole fruit or vegetable, pulp included, rather than separating juice from pulp. The NeverClog is a dedicated auger-based juicer built specifically to extract juice and eject pulp, which a blender cannot do on its own.

Why is the Ninja juicer so much cheaper than Hurom or Kuvings?

Partly warranty and brand history - Ninja backs the JC151 for 1 year versus Kuvings' 10-year coverage and Hurom's 10-year motor warranty on the H-AA - and partly because SharkNinja produces at much higher volume across many product categories, while Hurom and Kuvings build their business specifically around juicer engineering.

Does the Ninja NeverClog really never clog?

SharkNinja's own product description focuses on "Total Pulp Control" via two interchangeable pulp filters rather than promising zero clogging under all conditions. Fibrous produce like celery can still slow any auger juicer down; the filters are designed to reduce that, not eliminate it entirely.

Which juicer in this comparison is best for whole fruit without cutting first?

The Kuvings C7000 has the widest feed chute in this comparison at 3 inches, built specifically to accept whole apples and small produce without pre-cutting.

For most first-time buyers comparing a Ninja juicer against the bigger cold-press brands, the decision comes down to budget versus warranty: the Ninja NeverClog JC151 gets you into cold-press juicing for under $130 with a 1-year warranty, while Hurom and Kuvings cost three to four times as much but back that price with a decade or more of dedicated juicer engineering and, in Kuvings' case, a 10-year warranty. If you are not sure you will use a juicer daily, start with the Ninja. If you already know cold-press juice is part of your routine, the extra cost of a Hurom or Kuvings buys longer-term reliability.

Prices and availability confirmed as of September 8, 2026, and may change.